RIVERTRACE ENGINEERING (RTE) SMART 50M
Multiple optical sensors measure the combination of light absorbed and scattered by oil droplets in the sample stream. The sensor signals are read by a microprocessor which uses sophisticated algorithms to determine the concentration of oil and solids in the stream. The oil concentration is displayed on an alphanumeric display. A microprocessor drives a 4-20 […]
RIVERTRACE ENGINEERING (RTE) SMARTSAFE BILGE OVERBOARD SECURITY SYSTEM
Demonstrate Marpol Compliance Cost Effective Prevention of illegal discharge Easy installation, low maintenance. Capable of recording other miscellaneous ships data Compatible with all IMO Resolutions MEPC 107 (49) MEPC 60 (33) A393X Shore-based event reports SmartSafe Bilge Overboard Security System SmartSafe Bilge Overboard Security SystemSmartSafe Bilge Overboard Security SystemSMART CELL 15ppm Bilge Alarm MEPC […]
RIVERTRACE ENGINEERING (RTE) OIL DISCHARGE MONITOR
The Oil Discharge Monitoring Equipment (Smart ODME) has been designed to provide means of monitoring, recording and controlling the ballast discharge in accordance with the requirements of MEPC 108(49). Discharge limits are set at 30 Litres per nautical mile and a total discharge is expressed as a proportion of the previous cargo for dirty ballast. […]
RIVERTRACE ENGINEERING (RTE) 15 PPM BILGE ALARM
IMO Resolution MEPC 107 (49) came into effect on 1st January 2005 and applies to all new installations of oil content monitors within engine room spaces. This applies to existing ships and ships whose keel is laid on or after 1st January 2005. The Rivertrace Smart-Cell Bilge Alarm meets the requirements of MEPC 107 (49) […]
